0900–1330, Tuesday, 6 October
Versailles Ballroom, Hilton Riverside
This event is sold-out.
Sponsored by 
Please share ideas and follow the discussion in this session on Twitter using the hashtag #ATCEYP.
This workshop will show young professionals how to navigate cost pressures that will drive our industry in the short- and mid-term future. Industry professionals will share their experiences and inspire young professionals to follow suit. Participants will learn that efficiency is the all-time key to extract value, at 50 $/bbl as well as at 150 $/bbl.
Speakers
Production and Operations
George E. King
Engineer, George E. King Engineering
Reservoir Engineering
Tom Blasingame
Professor, Texas A&M University
Drilling and Completions
David Pritchard
President, Successful Energy Practices International
Young Professionals Reception
1730–1900, Tuesday, 6 October
Sponsored by
Mingle with fellow young professionals at this reception. Admittance is included with a Young Professionals Workshop ticket. Winners of the Annual ATCE Young Professionals Paper Contest will be presented a certificate at the reception.
| Winner Name | Paper Title |
Marshall J. Carolus, INTEK |
The Impact of Oil Prices on Oil Shale Development in the United States |
Francesco Verre, Petrobel |
Asset Life-Cycle OPEX Modelling With Montecarlo Simulation To Reduce Uncertainties and To Improve Field Exploitation |
David E. Riestenberg, Advanced Resources International |
Lessons Learned While Conducting Drilling and CO2 Injection Operations at the Victor J. Daniel Power Plant in Mississippi |
Gioia Falcone, Texas A&M University |
Plunger Lift Modeling Toward Efficient Liquid Unloading in Gas Wells |
Justin Debord, Baker Hughes |
Development and Field Application of a Novel Non-Acid Calcium Naphthenate Inhibitor |
Jeremiah G. Pearce, Shell International |
High Resolution, Real Time Casing Strain Imaging for Reservoir and Well Integrity Monitoring: Demonstration of Monitoring Capability in a Field Installation |
Robert D. Massingill, ExxonMobil |
Training the Next Generation of Project Leaders |
Khyati Rai, Chevron |
Oil-Recovery Predictions for Surfactant Polymer Flooding |
Abdulkareem Mohamad Al-Sofi |
Streamline Based Simulation of Non Newtonian Polymer Flooding |
Ryan G. Ezell |
Causes of Severe Magnetite Formation During Underbalanced Drilling and Practical Mitigation Strategies |
Zongyu Zhai |
Coupled Thermoporomechanical Effects on Borehole Stability |
Maysam Pournik |
Acid Re-fracturing: Is It a Good Practice? |
Hai Liu, Schlumberger |
Combination of Chemical Diverters and Degradable Fiber Technology Enhances the Success of Stimulation in Complex Carbonate Environments |
Joo T. Ong, Baker Hughes |
Qualification Testing Toward Utilizing an In-Well Flowmeter for Production Optimization and Allocation in Nigeria |
Sivakumar Subramanian, Chevron |
Flow Assurance Design and Initial Operating Experience From Blind Faith in Deepwater Gulf of Mexico |
Masa Prodanovic, University of Texas at Austin |
Coupling Capillarity-Controlled Fluid Displacement With Unconsolidated Sediment Mechanics: Grain Scale Fracture Opening |
Kenji Furui, ConocoPhillips |
A Comprehensive Modeling Analysis of Borehole Stability and Production Liner Deformation for Inclined/Horizontal Wells Completed in a Highly Compacting Chalk Formation |
Brian LeCompte, Baker Hughes |
Evaluation of Haynesville Shale Vertical Well Completions With a Mineralogy Based Approach to Reservoir Geomechanics |
Lin Liang, Schlumberger |
Determination of Petrophysical Parameters and Mud Filtrate Invasion Profile Using Joint Inversion of Induction Logging and Pressure Transient Measurements |
Piyush Srivastava, Baker Hughes |
Development and Field Application of a Novel Non-Acid Calcium Naphthenate Inhibitor |
Robert A. Pinnick, Chevron |
Flow Assurance Design and Initial Operating Experience From Blind Faith in Deepwater Gulf of Mexico |
Martin Price, Chevron |
Flow Assurance Design and Initial Operating Experience From Blind Faith in Deepwater Gulf of Mexico |
