SPE Projects, Facilities & Construction
Volume 6, Number 1, March 2011, pp. 41-53

SPE-124711-PA

CO2/Brine Surface Dissolution and Injection: CO2 Storage Enhancement

View full textPDF ( 602 KB )

DOI  More information 10.2118/124711-PA http://dx.doi.org/10.2118/124711-PA

Citation

  • Eke, P.E., Naylor, M., Haszeldine, S., and Curtis, A. 2011. CO2/Brine Surface Dissolution and Injection: CO2 Storage Enhancement. SPE Proj Fac & Const  6 (1): 41-53. SPE-124711-PA. doi: 10.2118/124711-PA.

Discipline Categories

  • 2.3.2 Safety in Design and Engineering
  • 2.5.1 Global Climate Change/CO2 Capture and Management
  • 3.6 Research and Development Programs
  • 4.1 Processing Systems and Design
  • 4.1.1 Process Simulation
  • 4.1.5 Processing Equipment

Keywords

  • CO2 Capture and Storage, Process Design and Simulation, CO2 Injection Strategies, Climate Change, Leakage Risk Mitigation

Summary

Carbon capture and storage (CCS) is capable of reducing atmospheric emissions of greenhouse gases from coal or gas-fired power plants. The upward buoyancy of dense-phase carbon dioxide (CO2) in deep reservoirs means that sites need to be chosen with a methodology that carefully evaluates details of performance during and after the injection process. Standard methods of site evaluation for saline aquifers overwhelmingly focus on the aspects of geological containment and monitorability. Also important to storage-site performance is the engineering design of transport and injection. Transport to storage in offshore saline aquifers is normally expected to be by pipeline. There are several proposed methods of CO2 injection: for example, as a dense phase, in the liquid or supercritical phase, as water-alternating-gas cycles, or as carbonated brine. These result in different migration pathways in the aquifer during the short term (1 to 50 years) and different storage distributions in the long term (1,000 to 10,000 years). To develop a methodology suitable for making informed decisions for aquifers offshore of the UK, several of these different methods are being evaluated. A chemical-engineering and reservoir-engineering approach will be used to define some of the important surface-transport and subsurface interactions. Important surface features may include the energy balance, location, sizing, materials specification, and costing of surface equipment for mixing and transporting CO2.

© 2011. Society of Petroleum Engineers

View full textPDF ( 602 KB )

History

  • Original manuscript received: 30 April 2010
  • Meeting paper published: 8 September 2009
  • Revised manuscript received: 23 August 2010
  • Manuscript approved: 15 September 2010
  • Published online: 28 February 2011
  • Version of record: 3 March 2011