SPE Production & Operations
Volume 25, Number 1, February 2010, pp. 19-24

SPE-117177-PA

A Case History of Heavy-Oil Separation in Northern Alberta: A Singular Challenge of Demulsifier Optimization and Application

View full textPDF ( 369 KB )

DOI  More information 10.2118/117177-PA http://dx.doi.org/10.2118/117177-PA

Citation

  • Wylde, J.J., Coscio, S., and Barbu, V. 2010. A Case History of Heavy-Oil Separation in Northern Alberta: A Singular Challenge of Demulsifier Optimization and Application. SPE Prod & Oper  25 (1): 19-24. SPE-117177-PA. doi: 10.2118/117177-PA.

Discipline Categories

  • 5.5.4 Rock/Fluid Interactions
  • 5.3.6 Produced Water Management and Control

Summary

This case history tracks the continual improvement cycle for the fluid-separation process of a heavy-oil/oil-sands production facility in northern Alberta over a period of 3 years. The major challenge posed by the operator of this 13 to 16°API crude oil was to move away from injection of two separate demulsifier formulations to injection of a single product. This was not an easy task because of the very different conditions that existed at the two injection locations. The first location was at a series of injection points upstream of the gathering stations before separation where temperatures could reach subzero conditions, and the second was at the battery receiving facility where heating increased temperatures to 100°C. Water cut and shear were also very different, and the operator required a very strict 0.2% basic sediments and water (BS&W) on the crude exiting any of the four treater tanks. To complicate issues further, crude-oil viscosity ranged from 500 to 5,000 cp.

A unique bottle testing method was developed and used to simulate the field conditions as accurately as possible. Details are given on the chemistry of the individual components of the demulsifier determined to be so crucial to adequate performance and how this was optimized in the field after being identified from the bottle tests.

Results show how careful consideration was given to the concentration of the demulsifier bases in the blends, and show the curious observation that dilution of the final product made a big difference to the final performance in the field. Elaboration is given on potential mechanisms explaining the dilution effect, and this paper will conclude with observations on how careful design of field testing followed by field implementation can indeed solve complex separation issues and address individual-well, battery, and field requirements.

© 2009. Society of Petroleum Engineers

View full textPDF ( 369 KB )

History

  • Original manuscript received: 31 July 2008
  • Meeting paper published: 20 October 2008
  • Revised manuscript received: 1 December 2008
  • Manuscript approved: 20 December 2008
  • Published online: 10 September 2009
  • Version of record: 1 March 2010