SPE Reservoir Evaluation & Engineering
Volume 12, Number 1, February 2009, pp. 104-115

Summary

Sarawak Shell Berhad has a number of offshore gas fields that produce from the Luconia carbonate formation, which can exhibit high-compressibility pore-collapse deformation. Recent accelerated subsidence has been observed at several of these fields, which extrapolates to final subsidence values well above previous estimates. This paper describes a geomechanical study involving core work to determine if the Luconia formation compressibility is sensitive to brine flow from the rising aquifer and a 3D geomechanical finite-element model developed to predict future subsidence and lateral movements for the F23 platform.

Compaction tests were performed on the Luconia core from three different gas fields. Tests on twin plugs were conducted—one plug undergoing a standard uniaxial zero-lateral-strain compaction test, while its twin has several pore volumes of simulated-formation brine flowed through it (at virgin in-situ stress conditions) before the compaction loading. Four sets of compaction tests on twin plugs were completed. The higher-porosity samples showed characteristic pore-collapse behavior consistent with previous measurements on Luconia mouldic limestone core. No sensitivity to brine flow was observed. In-situ compaction logs in the field also do not show increased compressibility in sections flooded by the rising gas-water contact (GWC). The geomechanical model uses a relatively simple structural model comprised of four layers—two overburden formations, the Luconia carbonate and one underburden formation. A nonlinear deformation model for the Luconia formation captures the accelerating pore-collapse response observed in the core and in-situ compaction measurements. The model is calibrated to GPS-measured platform subsidence and is consistent with measured core- and field-compaction properties. The results predict that platform subsidence rates with depletion would level off, with a maximum subsidence of 18.5 ft +/– 1 ft at an abandonment pressure of 300 psi. Platform subsidence in the two years following the work continues to follow the predicted values.

This work illustrates the importance of integrated geomechanical core testing, field-monitoring measurements, and modeling to accurately predict compaction and subsidence effects in highly compacting environments.

© 2009. Society of Petroleum Engineers

View full textPDF ( 2,417 KB )

History

• Original manuscript received: 16 July 2007
• Meeting paper published: 30 October 2007
• Revised manuscript received: 16 May 2008
• Manuscript approved: 17 June 2008
• Published online: 2 March 2009
• Version of record: 26 February 2009