SPE Reservoir Evaluation & Engineering
Volume 13, Number 1, February 2010, pp. 109-117

SPE-117579-PA

Miscible Interaction Between Matrix and Fracture: A Visualization and Simulation Study

View full textPDF ( 1,326 KB )

DOI  More information 10.2118/117579-PA http://dx.doi.org/10.2118/117579-PA

Citation

  • Er, V. and Babadagli, T. 2010. Miscible Interaction Between Matrix and Fracture: A Visualization and Simulation Study. SPE Res Eval & Eng  13 (1): 118-130. SPE-117579-PA. doi: 10.2118/117579-PA.

Discipline Categories

  • 6.4 Primary and Enhanced Recovery Processes
  • 6.5 Reservoir Simulation
  • 6.8 Fundamental Research in Reservoir Description and Dynamics
  • 6.3 Fluid Dynamics

Keywords

  • fracture-matrix interaction, miscible flooding, matrix and fracture dispersivities, diffusion, experimental and numerical modeling

Summary

CO2 injection has been applied in naturally fractured reservoirs (NFRs) for the purpose of enhanced oil recovery (i.e., the Weyburn and Midale fields, Canada; the Wasson and Slaughter fields, USA; and the Bati Raman field, Turkey). The matrix part of these types of reservoirs could potentially be a good storage medium as well. Understanding the matrix/fracture interaction during this process and the dynamics of the flow in this dual-porosity system requires visual analyses. We mimicked fully miscible CO2 injection in NFRs using 2D models with a single fracture and oil (solute)/hydrocarbon solvent pairs. The focus was on the visual pore-scale analysis of miscibility interaction, breakthrough of solvent through fracture, transfer between matrix and fracture, and the dynamics of miscible displacement inside the matrix.

First, matrix/fracture interaction was studied intensively using 2D glass-bead models experimentally. The model was prepared using acrylic sheets and glass beads saturated with oil as a porous medium while a narrow gap of 1-mm size containing filter paper served as a fracture. The first contact miscible solvent (pentane) was injected into the fracture, and the flow distribution was monitored using an image-acquisition and -processing system. The produced solvent and solute were continuously analyzed for compositional study. The effects of several parameters, such as flow rate, viscosity ratio (oil/solvent), and gravity, were studied. Next, the process was modeled numerically using a commercial compositional simulator, and the saturation distribution in the matrix was matched to experimental data. The key parameters in the matching process were the effective diffusion coefficients and the longitudinal and the transverse dispersivities. The diffusion coefficients were specified for each fluid, and dispersivities were assigned into gridblocks separately for the fracture and the matrix.

© 2010. Society of Petroleum Engineers

View full textPDF ( 1,326 KB )

History

  • Original manuscript received: 12 August 2008
  • Meeting paper published: 11 October 2008
  • Revised manuscript received: 17 February 2009
  • Manuscript approved: 27 February 2009
  • Published online: 4 February 2010
  • Version of record: 24 February 2010