SPE Journal
Volume 14,
Number 4,
December 2009,
pp. 579-587
Summary
Non-Darcy flow is often observed near wells and in hydraulic fractures where
relatively high velocities occur. In these regions, an empirical model,
Forchheimer's equation, is used in place of Darcy's Law. It includes a
quadratic correction to the linear model and has been adequately fit to many
experimental data sets, while found to be insufficient in others. Furthermore,
a number of numerical and theoretical approaches have shown limitations of the
Forchheimer model in the laminar flow regime. It is important to understand the
applicability of Forchheimer’s equation and to be able to obtain good
predictions of macroscopic properties so that nonlinear flow can be properly
modeled in reservoir simulators.
In this work, non-Darcy flow of an incompressible fluid is modeled using a
physically representative (Bryant et al. 1993) pore-scale network model.
Quantitative and predictive results are obtained using both computer-generated
porous media and real sandstones digitized through x-ray computed
microtomography (XMT). A new friction factor correlation is developed for
laminar flow in converging/diverging ducts using the numerical solution to the
Navier-Stokes equations. The new equation is used to describe flow in pore
throats of the network model. The permeability and non-Darcy coefficient,
β, are determined for these isotropic and anisotropic media in which
Forchheimer's equation is applicable. The numerical model is compared to
existing experimental data and appears to be at least as successful as
correlations for predicting the non-Darcy coefficient in isotropic media.
Furthermore, limitations to Forchheimer’s equation at both low and high
velocities are determined and discussed.
© 2009. Society of Petroleum Engineers
View full textPDF
(
516 KB
)
History
- Original manuscript received:
2 August 2007
- Meeting paper published:
11 November 2007
- Revised manuscript received:
26 September 2008
- Manuscript approved:
1 October 2008
- Published online:
2 July 2009
- Version of record:
22 December 2009