Journal of Canadian Petroleum Technology
Volume 49, Number 7, July 2010, pp. 8-19

SPE-138973-PA

Estimation of Bitumen and Solids Content in Fine Tailings Using Low-Field NMR Technique

View full textPDF ( 1,963 KB )

DOI  More information 10.2118/138973-PA http://dx.doi.org/10.2118/138973-PA

Citation

  • Motta Cabrera, S.C., Bryan, J., and Kantzas, A. 2010. Estimation of Bitumen and Solids Content in Fine Tailings Using Low-Field NMR Technique. J Can Pet Technol  49 (7): 8-19. SPE-138973-PA. doi: 10.2118/138973-PA.

Discipline Categories

  • 6.9.4 Oil Sand/Shale/Bitumen
  • 5.5.4 Rock/Fluid Interactions
  • 5.4.3 Single and Multiphase Flow Metering

Keywords

  • Low-field NMR technique

Summary

The oil sands mining and extraction processes in Canada produce large volumes of tailings that are a mixture of mainly water, clay, sand, chemicals and bitumen. This mixture is transported to tailings ponds, where gravity segregation occurs. During this process, a stable suspension called mature fine tailings (MFT) is formed, which requires many years to fully consolidate. Therefore, land reclamation and water recirculation become significant environmental issues. For this reason, it is important to understand the tailings' content and their settling properties. This study uses the low-field nuclear magnetic resonance (NMR) technique to estimate the water, bitumen and solids composition of synthetic and real tailings samples through a bimodal compositional detection method under ambient conditions. NMR measurements were conducted in 15 minutes, which is a relatively fast measurement allowing for rapid monitoring of tailings compositions. The results show that the NMR technique can be a potential on-site fast measurement of composition and settling characteristics of tailings.

© 2010. Society of Petroleum Engineers

View full textPDF ( 1,963 KB )

History

  • Original manuscript received: 3 May 2009
  • Meeting paper published: 13 June 2007
  • Revised manuscript received: 10 April 2010
  • Manuscript approved: 15 April 2010
  • Published online: 1 July 2010
  • Version of record: 1 July 2010