SPE Meeting Calendar

Final Program

Sunday, 14 June 2009

5:30–7:00 p.m.

Welcome Reception

Monday, 15 June 2009

7:00–8:00 a.m.	Registration and Continental Breakfast
8:00–8:30 a.m.	Chairmen's Opening Remarks & Participant Introduction and Expectations
8:30-10:00 a.m.	Understanding the Challenge Session Chairs: Tammy Webb, Murphy Oil, and Mukul Sharma, University of Texas
	Presentations:
	Review of the Key Learnings from 2004 SPE-ATW of “Injector Requiring Sand-Control” Mehmet Parlar, Schlumberger, and Dave Norman, Chevron ETC Sand Control in Sea Water Injectors: What We Know and Wished We Knew Robert Burton, ConocoPhillips Geomechanical Aspects of Sand Control in Offshore Injection Wells Hans Vaziri, BP
10:00–10:15 a.m.	Coffee Break
10:15–11:45 a.m.	Seawater Injector Performance Results – High Effective Stress Session Chairs: Jason Sauter, BP, and Robert Burton, ConocoPhillips
	Presentations:
	Sand Control in Water Injection Completions Jason Sauter, BP Mars Tension Leg Platform Waterflood Project - Injector Performance Tom Kenney, Shell Design and Performance of a Self-Contained Dump-Flood Well Utilizing FracPack Completions in Source and Injection Sands and Surface Read-Out of Electronic Downhole Metering for Flow Richard Rusch, Chevron, and David Stanley, BJ Services
11:45 a.m.–1:45 p.m.	Keynote Lunch Dr. Ganesh Thakur, VP Global Advisor and Chevron Fellow, Chevron ETC Recent Experiences with Major Water Injection Projects in Sand Control Environment
1:45–3:15 p.m.	Seawater Injector Performance Results – Medium Effective Stress Session Chairs: Jean-Noel Furgier, Total E&P, and Mike Barry, ExxonMobil Development Company
	Presentations:
	Application of Flow-Control Devices for Water Injection in the Erha Field David Haeberle, ExxonMobil Development Company Injection Wells Completed With Open Hole Stand Alone Screens in Angola Jean-Noel Furgier, Total E&P Seawater Injection Case History Utilizing Expandable Sand Screens for Sand Control in the Kikeh Field, Malaysia Tammy Webb, Murphy Oil
3:15–3:30 p.m.	Coffee Break
3:30–5:00 p.m.	Seawater Injector Performance Results – Low Effective Stress Session Chairs: Mukul Sharma, University of Texas, and George Wong, Shell E&P
	Presentations:
	Sea Water Injection Followed by Produced Water Farid Shecaira, Petrobras Installation of Kuito’s Fracpacks – Impact on Performance Andrew McCarty, Chevron ETC Water Injection Performance in Shallow, Viscous Oil, Waterflood: Alaskan North Slope Kenji Furui, ConocoPhillips
5:30–6:30 p.m.	Reception
6:30 p.m.	Dinner - Sponsored by ExxonMobil

<<Back to the Top

Tuesday, 16 June 2009

7:00–8:00 a.m.	Registration and Continental Breakfast
8:00-10:00 a.m.	Seawater Injector Performance Results - Summary and Discussions Session Chairs: George Wong, Shell E&P, and Dave Norman,Chevron ETC
	Presentations:
	United Kingdom’s Alba Field – 15 Year Injection History Rick Dickerson, Chevron ETC ACG Water Injector Well Completion Design and Performance Santiago Loboguerro, BP
	Open Discussion:
	Summarize lessons learned from field data and overall consensus on sand control performance of injectors based on previous sessions. Facilitators: George Wong, Shell E&P and Dave Norman, Chevron ETC
10:00–10:30 a.m.	Coffee Break - Sponsored by WellDynamics - Halliburton
10:30–12:00 p.m.	Seawater Injector Sand Control Design Needs and Best Practices - Cased Hole Session Chairs: Harvey Fitzpatrick, Halliburton, and Jason Sauter, BP
	Presentations:
	Perforation Optimization in Injectors Adi Venkitaraman, Chevron ETC Design and Execution of Highly Overbalanced Completions from a Floater Craig Stair, Shell Optimizing Water Placement with Intelligent Completion Technology: A Step-by-Step Approach to a Successful Design Vicky Jackson Nielsen, Halliburton
12:00.–1:30 p.m.	Lunch - Sponsored by Shell
1:30–3:00 p.m.	Seawater Injector Sand Control Design Needs and Best Practices - Open Hole Session Chairs: Mehmet Parlar, Schlumberger, and Tammy Webb, Murphy Oil
	Presentations:
	Filter Cake Clean-Up for Open Hole Injectors Steve Mason, Schlumberger Testing Sand Screens for Burst and Collapse Ratings George Gillespie, Weatherford International Combining Stimulation, Openhole Zonal Isolation and Inflow Control Devices to Optimize Injection Design and Performance Paul Day, Petrowell
3:00–3:30 p.m.	Coffee Break - Sponsored by WellDynamics - Halliburton
3:30–5:00 p.m.	Seawater Sand Control Injector Surveillance, Monitoring and Diagnostics Session Chairs: Alberto Casero, ENI Petroleum, and Harvey Fitzpatrick, Halliburton
	Presentations:
	Injection Monitoring and Control - A Synergistic Approach Mark Kuck, ENI Petroleum DTS in Water Injectors David Attaway, Halliburton Real-Time Surveillance for Understanding Injection-Well Performance Shah Kabir, Hess

<<Back to the Top

Wednesday, 17 June 2009

7:00–8:00 a.m.	Continental Breakfast
8:00–9:30 a.m.	Sand Control Seawater Injectors of the Future Chairperesons: Mike Barry, ExxonMobil Development Co., and Alberto Casero, ENI Petroleum
	Presentations:
	Fully Coupled Dynamic Wellbore and Reservoir Stimulation Used to Design Passive Inflow Control Application for Horizontal Water Injectors Kristian Brekke, Ziebel Qualification Testing Results for a New Formation Strengthening System David Attaway, Halliburton Intelligent Injectors - How Advances in Intelligent Completion Technology May Shape the Injector of the Future Colin McKay, WellDynamics
9:30–10:00 a.m.	Coffee Break
10:00–11:30 a.m.	Novel Issues Associated With Seawater Injectors Chairperesons: Dave Norman, Chevron ETC, and Mehmet Parlar, Schlumberger
	Presentations:
	What We Know and Don’t Know About Seawater Injection - Some Case Studies Mukul Sharma, University of Texas Presentation 2: Performance & Design of Seawater Injectors Requiring Sand Control Steve Marinello, Advantek International Polymer and DNA Tracer Application in Water Injectors Anna Dalager, Resman

<<Back to the Top

Tuesday Program

Wednesday Program