1400

166794

ADCO Life Protection Rules, a Powerful Tool in Enhancing Drilling Road Safety Performance
M.N. Boucif, R.A. Al Yaaqoobi, J. Khalid, ADCO

1430

166709

ADCO's Drilling Waste Management System Towards Zero Waste Disposals
S. Karrani, ADCO

1500

166791

Strategies for Maximising Risk Assessment Utility
T. Ghoneim, Energy Risk Consulting

1400

166779

1st Successful 6-1/8’’ Long Horizontal Hole (9,000 ft) Steering into a 2ft Thick High Temperature Reservoir and Completed with 4-1/2’’x3-1/2’’ Slotted Liner—UAE Case History
A.M. Bin Shamlan, F. Torres, M.B. Romdhane, A.B. Al Kholy, S.A. Mostafa, A.M. Al Hammadi, ADCO; M.R. A. Mokhti, Schlumberger

1430

166676

Expanding the Drilling Envelope to New Horizons in Saudi Aramco Shaybah Operations
R.F. Saleh, C. Verma, Saudi Aramco; A.M. Osman, D. Kuncahyo, N. Mikati, Schlumberger

1500

166786

Smart Calliper For Measurement While Drilling
W. Rasheed, Smart Reamer Drilling Systems; S. Zhou, N.M. Al-Khanferi, Saudi Aramco

1400

161721

Combination of Properly Engineered Reservoir Drilling Fluid and Filtercake Breaker Improves Performance of Extended Reach Wells Offshore Abu Dhabi
M.G. Saleh, ZADCO

1430

166694

Extended Aramco Method—Its Technico-Economic Significance in Non-Damaging Drill-In Fluid Design
M. Amanullah, J.T. Allen, Saudi Aramco

1500

166778

Formation Damage Evaluation of Drill-In Fluid Lubricant Products for Optimised Production in a Low-Permeability Gas Reservoir
P.I. Osode, M. Otaibi, M. Bataweel, S. Ammari, Saudi Aramco; R. Himes, Core Laboratories

1615

166748

Turnkey Solutions for Drilling Equipment Upgrades Enable Drilling Contractors to Minimise Planning Uncertainties and Investment Cost
T. Kipker, Bentec GmbH Drilling & Oilfield Systems

1645

166707

ADCO New Rigs Start Up Project—Increasing Rig Fleet and Activities by 30%, Challenges and Lessons Learned
M.H. Mohamed, M.Q. Hussain, R. Carvalho, C.W. Kuyken, ADCO

1715

166681

Field Tests Quantify Processes Utilising an Enhanced Downhole Dynamics Measurement Tool for Vibration Mitigation and Performance Optimisation
D.M. Veeningen, J. Salazar, E. Furniss, A. Coit, R. Hewlett, National Oilwell Varco

Alternate

166723

Improving The Operational Life of Riser Line Seals and Telescopic Joint Packers
O. Örjasater, V. Delhaye, SINTEF; J.M. Haukenes, S. Solberg, B. Bjorneklett, Aker Solutions

1615

166801

Precise Gain and Loss Detection Using a Transient Hydraulic Model of the Return Flow to the Pit
E. Cayeux, B. Daireaux, International Research Institute of Stavanger

1645

166773

The Importance of Acceptable Electrical Power Quality to the Drilling Industry Worldwide
I.C. Evans, Harmonic Solutions (Oil & Gas)

1715

166745

Downhole Vibration Analysis—Fishing Agitation Tool Efficiency in Stuck Pipe Recovery
M. Voghell, A.K. Mohanna, C. Hanley, C. Al-Khiriseh, National Oilwell Varco; A. Al-Mousa, A. Al-Amri, Saudi Aramco

Alternate

166697

Next-Generation, Right-Angle-Setting Composition for Eliminating Total Lost Circulation
S. Savari, D. L. Whitfill, J.T. Scorsone, Halliburton

1615

166783

Hydraulic Fracturing with Conformance Technology Successfully Applied in Nafoora Field, Libya: Case Study
K. Bettamer, M. Aljlaidi, Halliburton; M.B. Ben Shatwan, AGOCO

1645

166798

Optimum Lower Completion Design and Implementation for a Highly Fractured Carbonate Reservoir
M. Al Madan, Y.A. M. Gad, Saudi Aramco; K. Gohari, R. Vicario, A. Galimzyanov, P. Gavioli, Baker Hughes

1715

166730

Passive Inflow Control Device Autonomy—How Much Is Too Much?
T.A. Abdelfattah, G.A. Garcia, L. Garcia, S. Banerjee, Baker Hughes

Alternates

166800

A Milestone in Production Optimisation in the Niger Delta Using Intelligent Completions
C.C. Uchendu, E.J. Nnanna, O. Okpokpor, I. Yahaya, O. Friday, Shell; C. Erumwunse, C. Agbonaye, Halliburton

Back to the top