Coiled Tubing & Well Intervention Conference & Exhibition
spacer

Technical Agenda

Tuesday, 1 April, 0830 to 1200

SESSION 1

Session Chairpersons: Graeme M. Kelbie, Baker Oil Tools
Alan C.J. Turner, Halliburton
113782 Planning for Successful Rig Assist HP/HT Cleanout Operations • A. Lamont, P.B. Radcliffe, Shell UK; M. Klinck, J. Brumfield, G.J. Bell, Halliburton
113842 RFID Actuation of Self‑Powered Downhole Tools • P.M. Snider, Marathon Oil; T. Doig, iiiTec
113698 Improved Method for Underbalanced Perforating With Coiled Tubing in the South China Sea • G. Rae, M.B. Yusof, J. Ghani, Talisman; S.R. Mohd Mokhtar, J. Munro, Schlumberger
  Break
113813 Deepwater Isolation Valve Contingencies Using E‑Line Stroking Tool • B.J. Schwanitz, Welltec
113591 Development of Wells Technical Professionals • A. Smith, O.M. Skar, Shell International E&P; A.T. Morse, Robert Gordon University
113724 Improved System for Accessing Multilateral Wells in Canada • B.E. Harber, J. Stuker, D.A. Pipchuk, Schlumberger

Tuesday, 1 April, 1345 to 1715

SESSION 2

Session Chairpersons: Ian Retalic, Leading Edge Advantage
R. Steve Rossberg, BP
113676 CT‑Failure Monitoring: A Decade of Experience • A.R. Crabtree, BJ Services
113646 The Effects of Residual Bending Forces on Coiled‑Tubing Injector • R.S. Rosine, M. Bailey, I.L. Blanco, Halliburton
113712 Use of 3D Laser Imaging for Inspection of Coiled Tubing • A. Christian, S.M. Tipton, A.R. Emnett, University of Tulsa
  Break
113719 Coiled Tubing and Nitrogen Generation Unit Operations: Corrosion Challenges and Solutions Found in Brazil Offshore Operations • L.H. Duque, Z. Guimaraes, S.L. Berry, BJ Services; M. Gouveia, Petrobras
113037 Development of a High Performance Spoolable Connector • M.A. Ehtesham, J.I. Hriscu, A. Zhong, Halliburton
113149 Effect of External Mechanical Damage on the Fatigue Life of Coiled Tubing Exposed to Sour Environments • T. Padron, BJ Services

Tuesday, 1 April, 1345 to 1715

SESSION 3

Session Chairpersons: Eric J. Boeke, Tenaris
Andrew E. Patterson, BP
113756 Intervening With Coiled Tubing Through the Tubing Casing Annulus To Restore Well Control • B. Sonnier, M.J. Sackash, Halliburton
113708 The Operational and Economical Impact of CT Spoolable Connectors During the Last 5 Years in the Norwegian and Danish Sector of the North Sea: Case Histories • M. Sach, BJ Services; K. Maribu, ConocoPhillips; J. Haga, Talisman; K. Nesvik, StatoilHydro; C. Boye Moller, DONG Energy
113670 Through Tubing Inflatable Technology Deployed on a Downhole Tractor System Provides Real Time Cost Savings • G.M. Kelbie, Baker Oil Tools; J.D. MacKay, Welltec
  Break
113895 Effective Approach for CT Interventions on Inaccessible Offshore Platforms in the North Sea • J. Cochran, D. Petrone, A. Clubb, S. Greig, Schlumberger
113792 Unique Application of Coiled Tubing and Inflatable Packer Technology Leads to Successful Deoiling of Damaged Pipeline in Gulf of Mexico • I. Quintero, Chevron Pipeline; R.A. Murphy, J. Maddox, Weatherford; J. Noddin, Critical Path Strategies; R.A. Coles, Premium Energy Services
113589 Pressure Transient Analysis Data Collected by the Use of a Retrievable Gauge Hanger in Saudi Arabian Gas Wells • R. Zbitowsky, W. Nunez Garcia, A.M. Al Shawaf, H.M. Al Hussain, Saudi Aramco; B. Bill, PI Intervention

Wednesday, 2 April, 0830 to 1200

SESSION 4

Session Chairpersons: John G. Misselbrook, BJ Services
David Stewart, Shell International
113648 Improved Cooperation Between Service Company and Operator for Faster Development of Better Tools • M.C. Koenig, BP; S. McLaughlin, Impact Guidance Systems
113891 Wireline Deployed Metal Sealing Bridge Plug System: Operational Learning Curve and Subsequent Redevelopment • I.C. Chapman, K.S. Ng, ExxonMobil; N.M. Nor, RasGas; G. Mackenzie, G.L. Garfield, Baker Oil Tools
113805 New Electromechanical Perforating Technology Reduces Cost and Increases Safety in Workover Operations • R.A. Bargawi, Saudi Aramco; D.L. Dean, J. Clemens, C. Whitmire, Halliburton
  Break
113783 Efficient Offshore Scale Removal Without a Rig: Planning, Logistics, and Execution • Z. Guimaraes, V. Almeida, L.H. Duque, J.C. Pinto, S. Coutinho, J.V. Chagas, G.V. Da Costa, BJ Services; A.B. Franca, M. Gouveia, C. Peixoto, C.A. Teles, Petrobras
113806 Case History: Extended Stroke Downhole Power Unit Successfully Pulls Subsea Wellhead Plugs • D.R. McDaniel, J.R. Cromb, Anadarko Petroleum; J. Walton, HTK Consultants; J. Clemens, D.W. Moore, J. Huggins, Halliburton
113773 Entering Multilateral Wells Using Coiled Tubing • R.J. Proctor, R. Grant, BJ Services; A.J. Marron, D.P. Cubas Alvarez, Occidental Petroleum

Wednesday, 2 April, 0830 to 1200

SESSION 5

Session Chairpersons: Curtis G. Blount, ConocoPhillips
Alexander R. Crabtree, BJ Services
113288 Milling of Cast Iron Bridge Plug With Electric Line Conveyed Technology • F. Rattray, A. Annandale, Marathon Oil; R.F. Grassick, Welltec
113955 High Volume Wellwork Planning and Execution on the North Slope, Alaska • D.A. Cismoski, R.S. Rossberg, J.Y. Julian, G.L. Murphy, D. Scarpella, BP; A.A. Zambrano, C.A. Meyer, Schlumberger
113841 Cleanouts With Coiled Tubing in Low Bottomhole Pressure Wellbores • J. Li, B.H. Luft, G. Wilde, G. Alingig, F. Jumawid, BJ Services
  Break
113722 New Hydrajet Tool Demonstrates Improved Life for Perforating and Fracturing Applications • J.B. Surjaatmadja, Halliburton; J. Bezanson, ARC Resources; S.D. Lindsay, P.A. Ventosilla, K.A. Rispler, Halliburton
113655 Pushing the Wireline Operation to New Frontiers • M.A. Al Dhufairi, A.A. Ghamdi, D.R. Lewis, H.M. Nafa, Saudi Aramco
112774 Cementless Multi Zone Horizontal Completion Yields Three Fold Increase • B.D. Maddox, M. Wharton, ECA Holdings; R.L. Hinkie, B.P. Balcer, M. Farabee, Halliburton; J.W. Ely, Ely & Associates

Wednesday, 2 April, 1400 to 1600

SESSION 6

Session Chairpersons: Stephen Bruce, Schlumberger
Brian J. Schwanitz, Welltec
113930 Quick Rigup HWU Barge Assist Operations in the Gulf of Thailand • D. Robichaux, K.E. Henning, Halliburton
113700 Solving Excessive Water Production in a Prolific Long Horizontal Open Hole Drilled in a Naturally Fractured Carbonate Reservoir • S.C. Lightford, Halliburton; E. Pitoni, G. Burrafato, C.P. Serapigila, Eni E&P
113835 HP/HT WCCL Technology Aids Successful Deployment Perforating Operations on the Glenelg Field • W. Gordon, I. Pittman, M. Rydlewicz, Halliburton; R. Innes, Total E&P
113828 Extending Mature Field Life Using an Innovative Surface Controlled Subsurface Safety Valve (SC SSSV) • P. Lalanne, A. Ducasse, E. Barzu, Total E&P; F.G. Millet, H.J. Petit, G.A. Wallez, Geoservices

Wednesday, 2 April, 1400 to 1600

SESSION 7

Session Chairpersons: Steven J. Deshotels, National Oilwell  Varco
Tim Ellzey, Shell E&P
113855 Successful Offshore Application of Acid Tunneling Technology: Overcoming the Difficulties of High Depths, Temperatures, and Deviations • L.A. Alonso Perex, Repsol YPF; J.D. Diaz, M. Navarro, P.J. Moss, J.A. Curtis, BJ Services
113619 Comparison of Computational Fluid Dynamics of Erosion in Coiled Tubing to Field and Test Data • R.S. Rosine, I.L. Blanco, M. Bailey, Halliburton
113295 HP/HT Compact Motorhead for Larger-OD Coiled-Tubing/Jointed Pipe Operations: Design, Testing, and Successful Case History • M.A. Ehtesham, J.I. Hriscu, R.G. Howard, Halliburton
113808 Field Experience Using an Intervention Wellhead Structure Modeling and Monitoring System • K.R. Newman, E.A. Smalley, L. Linares, P. Kelleher, CTES/NOV

POSTERS

Authors present Tuesday, 1 April, 1730 to 1830

Session Chairperson: Graeme M. Kelbie, Baker Oil Tools
113669 A Field Study of Coiled Tubing Material Loss and Ovality • J.A. Boles, R. Burgos, J.A. Ballesteros Medina, Schlumberger
113326 Application of a Novel Rigid Setting Material as an Annular Barrier to Re Establish Pressure Integrity of Tubing in an Injection Well • H. Setiadi, D.D. Bewick, BP; J. Blair, R. Walger, E. Ridley, Halliburton
113707 An Isolation and Remediation Solution for Wellhead Maintenance in the North Sea • D. Petrone, P. Rice, P.H. Jorgen, Schlumberger; A. Stjernholm, DONG Energy
113695 Coiled Tubing Conveyed Proppant Treatment Yields Increase in Production Efficiency and Return on Investment • Z.T. Peak, M.B. Montes, D. Natenberg, Halliburton; J.M. Durkee, ConocoPhillips
113725 Coiled Tubing Jet Drilling With a Downhole Intensifier • J.J. Kolle, K. Theimer, T. Theimer, Tempress; R. Cox, S.R. Scherschel, Trican Well Services
113734 Cutting Concentric Casing Strings With Sand Slurry • G.R. Hebert, M.J. Sackash, R.D. Hogan, Halliburton
112863 First Production Log Run in a Heavy Oil Long Horizontal Well Through a Y Tool and Premium Screens • J.E. Montero, N. Salazar, Petroregional del Lago; A.P. Fondyga, K. Reyes, Schlumberger
113716 Stimulation With Coiled Tubing and Fluidic Oscillation • J.V. Ulloa Gutierrez, G.F. Callaroti, O. Akrich, Halliburton; R.R. Monroy, Pemex
113721 Expanding the Use of Turbodrills in Coiled Tubing and Workover Applications • C. Grigor, D. Conroy, M. Henderson, Smith Services
113711 Flow Properties and Drag Reduction Characteristics of Surfactant Based Fluids (SBF) in Large Scale Coiled Tubing • A.H. Ahmed Kamel, S.N. Shah, University of Oklahoma
113746 Fiber Sweeps for Hole Cleaning • R.M. Ahmed, N.E. Takach, University of Tulsa
113907 Innovative Tool for Coiled Tubing Depth Measurement Increases Productivity and Minimizes Costs While Improving Accuracy and Safety • P.I. Ohaegbu, S. Minish, Select Energy Systems; C. Morris, Count-Rite Oilfield Services; D. Boyd, Canadian Natural Resources