No word defines deepwater projects better than “innovation,” and on 25 February 2012, one of the most innovative field-development projects came on stream: Cas- cade and Chinook (C&C) in the US Gulf of Mexico (GOM). One well is producing from Cascade to the first floating production, storage, and offloading (FPSO) vessel in the US GOM. The project brings several firsts and innovations that will be available to the entire oil industry in the near future. I would like to call attention to some of those innovations. First, the FPSO uses a detachable buoy that allows early installation of the buoy and all umbilicals before arrival of the FPSO. This feature will allow the FPSO to disconnect and sail away from hurricanes, avoiding damages to the facilities. C&C also presents the first freestanding riser in the US GOM. Subsea boosting will increase production and reduce workover costs. These examples are just a few that show inno- vation applied to a deepwater development. I believe strongly that C&C will lead the way for future development of Lower Tertiary plays in the GOM.
I selected one paper for this feature that describes the planning, logistics, and technology of the two largest deepwater high-pressure perforation jobs executed suc- cessfully in the GOM; certainly, this provides very interesting reading if your company is in the Tertiary play or is planning to be.
Drilling management in deep water has always been a great challenge because of several constraints, including high cost; well engineering (exploratory wells); logistics (remote locations); health, safety, and environmental (local and international laws); licenses; and personnel management. One of the papers presents a very objective and clear explanation of the well-management process, describing the design methodolo- gy and the well-execution procedures used by Petrobras International in a remote and challenging area. This methodology can be applied to any well and could bring huge benefits for any drilling operation.
Are you lost in a “cloud” of drilling data? You are not the only one! Drilling-data management is one of the biggest challenges in our industry today. One of the feature papers presents solutions, gives examples, and shows the benefits of a correct use of drilling data.
Enjoy your reading.
Read the paper synopses in the May 2012 issue of JPT.
Jacques Braile Saliés, SPE, is the Drilling Manager of Queiroz
Galvão E&P. His 30-year career at Petrobras included various engineering and management positions in E&P: coordination of the Petrobras Technological Program on Ultradeepwater Exploitation Systems— PROCAP 3000, drilling manager for Petrobras America, and well operation manager for Petrobras International. Saliés holds a BS degree in mechanical engineering from the Military Institute of Engineering, Brazil, an MS degree in petroleum engineering from the Federal University of Ouro Petro, Brazil; and a PhD degree in petroleum engineering from the University of Tulsa. He has authored or coauthored several papers on drilling and subsea technology. Saliés served several terms on the SPE Board of Directors for the Brazil Section and serves on the JPT Editorial Committee.