The study incorporates the probability of seismically induced ground motions developed from a probabilistic seismic hazard analysis and the probability of landslide triggering given an input ground motion, to calculate the joint probability of seismically induced mass movement.
Potential subaerial and submarine sliding masses of sufficient size to trigger a tsunami were identified through a geomorphological analysis of seafloor bathymetry and topographic relief coupled with available regional geological studies of the area. Typical slide volumes were in the range of 107 to 108 m3, consistent with volumes noted during historical events.
In this study, the probability of triggering a mass movement was defined as the probability of exceeding a threshold seismically induced displacement value along a defined sliding surface beyond which uncontrolled movement of the slide mass was assumed to occur, leading to the potential development of a tsunami wave.
The results of the study indicated that seismically induced mass movements with potential for triggering a tsunami wave would have an annual probability lower than 1×10−3. Some of the slide scenarios selected in the study were used by others as input into hydrodynamic analyses for tsunami wave generation and propagation and subsequently to define design inundation levels and design wave events for marine facilities.
Find the paper on the HSSE-SR Technical Discipline Page free for a limited time.
26 - 28 Mar 2019
- Beijing, China
Share your experience with colleagues.
16 - 18 Apr 2018
- Abu Dhabi, UAE
30 Apr - 3 May 2018
- Houston, Texas
Celebrating 50 Years of OTC.
15 Apr 2018
- Abu Dhabi, UAE
This course provides a fundamental understanding of process safety techniques and how applying these techniques can improve safety, equipment reliability, environmental performance and reduce overall costs.
Plan to attend!
HSE Now is a source for news and technical information affecting the health, safety, security, environment, and social responsibility discipline of the upstream oil and gas industry.
©2003-2018 Society of Petroleum Engineers, All Rights Reserved.