With increasing public consciousness and concern for the environment, recent pipeline-leak incidents across the globe have proved that the cost to a company can be far more than the downtime and clean-up expenses. As more-stringent statutory regulations are being introduced, cost-effective and reliable leak-detection systems are in demand.
According to the 2004 paper “Leakage Detection Using Fiber Optics Distributed Temperature Monitoring” by Marc Nikles et al., “In the past few years, innovative distributed temperature monitoring techniques using optical fibers have demonstrated to be an efficient way to detect and localize leakages along pipelines. These techniques use a concept similar to optical domain reflectometry for the localization, whereas the temperature information is extracted from the analysis of the scattered light through Raman or Brillouin scattering processes. Raman-based systems were first proposed and used in practical applications, while the Brillouin-based technique has been introduced in the early ’90s and offers longer distance ranges.”
This paper details the methodology adopted to monitor gas-pipeline leakages using distributed fiber optics sensing. Distributed temperature sensing has been introduced to UAE pipelines by GASCO through its first installation in the Habshan/Ruwais/Shuweihat gas pipeline followed by the Habshan/Maqta/Tawelah pipeline projects.
The term “distributed sensing” refers to the use of an optical fiber as a linear sensor that provides valuable measurement information from all along the fiber itself. The measurement is based on the analysis of back-scattered light when a laser pulse travels down the optical fiber.
The sensing fiber is integrated into the asset (pipeline, cable, or structure) using a dedicated fiber cable. A single optical fiber replaces thousands of single-point sensors, providing a significant reduction in installation, calibration, and maintenance costs. In addition, assets can be monitored in real time, whereas, previously, this was complicated by their distance, location, or environment. Optical fiber is inexpensive, lightweight, pliable, immune to electromagnetic interference, and has a life expectancy of several decades, which makes it a cost-effective, flexible, durable, and inert sensor medium.
Data from a stimulated Brillouin scattering (SBS) signal is processed using both time and frequency domain analysis. The analysis is performed by collecting the SBS information from every location along the sensing optical fiber, yielding an uninterrupted and fully distributed temperature or strain profile.
The leak-detection system uses a single laser to generate the two signals used to stimulate backscattering—an optical pulse (or pump) and a continuous-wave optical signal, known as the probe signal. Using a single laser gives stability because it self-compensates for drift.
When the frequency difference of the two signals reaches the Brillouin frequency shift, a resonance condition is established, leading to the efficient stimulation of Brillouin scattering. This stimulation induces an energy transfer from the pulse to the probe signal and an amplification of the probe signal. The technique enables the rapid and accurate identification of the local resonance condition at every location along the sensing fiber and computes the local temperature and strain conditions. The SBS stimulation occurs only if the pump and probe signals are counterpropagating inside the optical fibers. For this reason, two fibers are used. The first one brings the probe signal to the far end of the second optical fiber, which acts as the sensing fiber. These two fibers form a loop and are, most of the time, integrated in the same cable (i.e., the sensing cable). In some cases, the measurement can be performed over the entire loop distance.
Find paper SPE 188407 on the HSE Technical Discipline Page free for a limited time.
Find paper SPE 188407 on OnePetro.
Don't miss our latest HSE content, delivered to your inbox twice monthly. Sign up for the HSE Now newsletter. If you are not logged in, you will receive a confirmation email that you will need to click on to confirm you want to receive the newsletter.
11 - 14 Nov 2019
- Abu Dhabi, UAE
Providing an unrivalled global platform for oil and gas professionals
11 - 12 Sep 2019
- Bakersfield, California, USA
Combine engineering with computer programming in this 2-day course
3 Oct 2019
- Calgary, Alberta, Canada
Being Human - reserve your place at this one-day course
3 - 4 Oct 2019
- Calgary, Alberta, Canada
For a better understanding of geomechanical factors, attend this course
1 Nov 2019
- Bali, Indonesia
Registration Coming Soon
9 - 11 Nov 2019
- Abu Dhabi, UAE
The programme combines expert input, case studies, and immersive scenarios from the E&P and other industries to embed your learning and enable you to progress to the next level of your career.
17 - 18 Oct 2019
- San Antonio, Texas, USA
Discuss Deepwater Drilling with colleagues and peers at this two-day event
HSE Now is a source for news and technical information affecting the health, safety, security, environment, and social responsibility discipline of the upstream oil and gas industry.
©2003-2019 Society of Petroleum Engineers, All Rights Reserved.