Evaluating Sand-Screen Performance With Sand-Retention Tests and Numerical Modeling

Getty Images

This paper presents a combined experimental and numerical-modeling study on sand-screen performance. The objective is to develop an improved methodology for optimal sand-screen-aperture selection by addressing some of the limitations present in existing sand-retention tests. A new sand-retention-test facility has been developed that incorporates a number of improvements into the design and experimental procedure.

Existing Approach to Sand-Screen-Performance Evaluation

Empirical criteria have traditionally been applied for selecting screen size on the basis of one or two parameters derived from the particle-size distribution (PSD). Because of the problems associated with the empirical criteria, the industry standard practice is to conduct laboratory sand-retention tests on screen coupons. This is particularly relevant for premium sand screens, the filter media of which are fundamentally different from those of a slotted liner or wire-wrap screen. The same mechanisms for forming stable, multiparticle bridges may or may not be applicable. In most cases, the cross-sectional path through these filter media is tortuous and 3D. Laboratory sand-retention testing is typically required to determine the effective screen opening size. There are no universal industry standards on how sand-retention testing should be performed or results interpreted. Sand-screen performance is often evaluated on the basis of two criteria: screen plugging and sand retention.

Limitations of the Existing Approach. While the acceptance criteria for sand production and produced-particle size are well-defined and these factors are relatively straightforward to measure, screen plugging is defined differently by different investigators. There is currently a lack of measurements that can be used to accurately quantify screen plugging and screen permeability.

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper OTC 26434, “Evaluating Sand-Screen Performance With Improved Sand-Retention Test and Numerical Modeling,” by B. Wu, S.K. Choi, Y. Feng, R. Denke, T. Barton, C.Y. Wong, J. Boulanger, W. Yang, and S. Lim, CSIRO, and M. Zamberi, S. Shaffee, M.B. Jadid, Z. Johar, and B.B. Madon, Petronas, prepared for the 2016 Offshore Technology Conference Asia, Kuala Lumpur, 22–25 March. The paper has not been peer reviewed. Copyright 2016 Offshore Technology Conference. Reproduced by permission.
...
This article is reserved for SPE members and JPT subscribers.
If you would like to continue reading,
please Sign In, JOIN SPE or Subscribe to JPT

Evaluating Sand-Screen Performance With Sand-Retention Tests and Numerical Modeling

10 September 2016

Volume: 68 | Issue: 10

STAY CONNECTED

Don't miss the latest content delivered to your email box weekly. Sign up for the JPT newsletter.