Factors Governing the Performance of Multilayered Metal-Mesh Screens

Getty Images

Multilayered metal-mesh screens (MMSs) are widely used as standalone screens for sand control in unconsolidated formations. The nominal rating of such screens is usually based on the specifications of the filter layer. It is often found that screens with the same filter-layer nominal rating perform differently. It is shown in this study that the primary reason for this is that the sand-retention performance of multilayered MMSs is a strong function of not only the filter layer but also the protection layer and the support layer.

Introduction

The sand-retention ability of a multilayered MMS is evaluated by examining the pore-size distribution (PSD) of the screen as well as its slurry-test sand production [the sand-production evaluation is for plain-square-mesh (PSM) screens only]. Three major steps are involved in the evaluation process:

1. Generate a multilayered virtual mesh assembly (an example is provided in Fig. 1) based on the mesh specification and different layer-overlap, layer-alignment, and relative pore-size-ratio conditions.

2. Evaluate the PSD of the virtual screen with a specialized filtration model.

3. Enter the PSD information into the analytical slurry-test model to quantify the sand-retention performance of the target screen. The model incorporated in this study uses the entire PSD of a PSM screen to predict sand production.

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 178955, “Factors Governing the Performance of Multilayered Metal-Mesh Screens,” by Chu-Hsiang Wu, SPE, and Mukul M. Sharma, SPE, The University of Texas at Austin, and Rajesh Chanpura, SPE, Mehmet Parlar, SPE, and Joseph Ayoub, SPE, Schlumberger, prepared for the 2016 SPE International Conference and Exhibition on Formation Damage Control, Lafayette, Louisiana, USA, 24–26 February. The paper has not been peer reviewed.
...
This article is reserved for SPE members and JPT subscribers.
If you would like to continue reading,
please Sign In, JOIN SPE or Subscribe to JPT

Factors Governing the Performance of Multilayered Metal-Mesh Screens

Chris Carpenter, JPT Technology Editor

10 September 2016

Volume: 68 | Issue: 10

STAY CONNECTED

Don't miss the latest content delivered to your email box weekly. Sign up for the JPT newsletter.