A Methodology for Multilateral-Well Optimization

Source: Getty Images.

Multilateral wells with smart completions controlled by different flow-control technologies offer great operational flexibility, with each lateral able to be operated and optimized independently. Understanding the contribution of each lateral in the complexity of the system was a major objective of this study. In order to optimize the system and predict results under different operational conditions, a multilateral-well-modeling methodology was developed. This methodology covers two main factors affecting multilateral productivity—a flow-dependent gas/oil ratio (GOR) and interference between the laterals.

Wells Overview

The study was based on multilateral wells complete with inflow control valves (ICVs). As a general description, the wells are completed with three to seven laterals and each lateral is isolated by packers and controlled by an ICV, as shown in Fig. 1.

Multilateral-Well Modeling

A multiphase surface system flow simulator that is able to optimize production from wells and networks as an integrated system was adapted to generate and optimize the subsurface multilateral-well flow behavior. This simulator is used mainly for surface network modeling and optimization, but the complex subsurface well system was modeled with this application. This complex simulation model resolves and finds the optimal ICV pressure drop and diameter for each lateral for different inflow-­performance conditions, such as different rate-­dependent GOR curves at different operational conditions. The model was created as a black-oil model. In each lateral, the flow and pressure drop through the reservoir are determined in the horizontal section, as well as the annular flow between the casing and tubing. Each ICV is represented with a choke model.

This article, written by Special Publications Editor Adam Wilson, contains highlights of paper SPE 183004, “A Methodology for Multilateral-Well Optimization—Field Case Study,” by Ivan Cetkovic, SPE, Majed Shammari, SPE, and Talal Sager, Saudi Aramco, prepared for the 2016 Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi, 7–10 November. The paper has not been peer reviewed.
This article is reserved for SPE members and JPT subscribers.
If you would like to continue reading,
please Sign In, JOIN SPE or Subscribe to JPT

A Methodology for Multilateral-Well Optimization

01 May 2017

Volume: 69 | Issue: 5


Don't miss the latest content delivered to your email box weekly. Sign up for the JPT newsletter.