Challenges During Surface-Facility-Project Implementation for a Full-Field Polymer Flood

Source: Getty

This paper presents key challenges in surface-facilities-project implementation during the construction and operational-readiness phase of a project and presents results from full-field implementation. The key areas discussed are operational difference in the available technologies for concentrated-polymer dissolution, transfer of viscous polymer mother solution with minimal viscosity loss, efficacy of the pumping facility with high-viscosity non-Newtonian liquid, and supply-chain strategy.

Introduction

Because of positive responses from an enhanced-oil-recovery pilot, a full-field polymer-flood development plan was implemented in the Mangala field in India. Selecting the right facility design was of paramount importance once the pilot study confirmed the benefits of polymer flood over waterflood. A multilayered pattern drive with 129 injectors in an intense brownfield execution poses immense challenges for facility engineering. Thus, the world’s largest polymer-injection plant was built, primarily by scaling up the pilot.

This article, written by Special Publications Editor Adam Wilson, contains highlights of paper SPE 181615, “Challenges During Execution, Construction, and Operational-Readiness Phase of Surface Facilities in a Full-Field Polymer-Flood Project,” by Santosh Mohanram, Premashis Bhaumik, SPE, and Shagun Jain, SPE, Cairn India, prepared for the 2016 SPE Annual Technical Conference and Exhibition, Dubai, 26–28 September. The paper has not been peer reviewed.
...
This article is reserved for SPE members and JPT subscribers.
If you would like to continue reading,
please Sign In, JOIN SPE or Subscribe to JPT

Challenges During Surface-Facility-Project Implementation for a Full-Field Polymer Flood

01 June 2017

Volume: 69 | Issue: 6

STAY CONNECTED

Don't miss the latest content delivered to your email box weekly. Sign up for the JPT newsletter.