TOPICS OF INTEREST
Underbalanced Drilling With Coiled Tubing in Marginal Shallow Wells
The complete paper describes a recent directional coiled-tubing drilling (DCTD) job completed for an independent operator in the Appalachian Basin.
Isolation Barriers With Coiled Tubing in Plug-and-Abandonment Operations
Plug-and-abandonment (P&A) operations can be expensive, leading to negative net present value. Historically, P&A operations in the North Sea—estimated to hold some 3,000 wells of declining production—were performed with either drilling or workover rigs.
Coiled-Tubing Telemetry Intervention in Shut-In Conditions
When a new horizontal well in Asia was incapable of unassisted flow, coiled tubing (CT) was selected for the perforation and stimulation intervention. Mechanical isolation was required to ensure that the stimulation fluids entered only the new zones.
If the papers presented at the SPE/ICoTA Coiled Tubing and Well Intervention Conference and Exhibition this March are anything to judge by, then coiled-tubing drilling seems to be regaining some interest in the broader market.
Ultradeep-Field Study: Extreme-Underbalanced HP/HT Coiled-Tubing-Conveyed Perforating
An early commitment to integrate MPD into an HP/HT drilling operation can make MPD more than just an enabling tool and turn it into a performance tool that offers significant operational benefits.
Custom-Designed Coiled Tubing Leads to Success in Extended-Reach Operations
Advanced horizontal drilling, multistage hydraulic fracturing, and other technologies have helped make the Vaca Muerta shale oil and gas resource economically viable.
Coiled Tubing With Real-Time-Measurement Tools Helps Overcome Stimulation Problems
The treatment in a deepwater, frac-packed well with fiber-optic-equipped coiled tubing (CT) and a rotating, hydraulic high-pressure jetting tool achieved successful stimulation of a 500-ft-long frac-packed zone after several previous failures using different techniques.
Novel Coiled-Tubing Perforation Technique and Stimulation in Carbonate Gas Well
This paper discusses a novel approach to abrasive perforating, including the first-ever use of an acid-soluble abrasive material and ending with CT-jetting-assisted nitrified stimulation.
Core Drilling Using Coiled Tubing From a Riserless Light-Well-Intervention Vessel
This paper details the planning, design, and execution of a project involving the core drilling of three wellbores using coiled-tubing directional drilling along the future Rogfast tunnel route on the Norwegian coast.
Coiled Tubing Applications
The coiled-tubing industry is adapting to the changing environment. The next 12 months could bring greater or lesser volatility but the coiled-tubing industry’s record last year indicates that it will still be moving forward.
Focus on Ancillary Equipment and Fatigue in Coiled-Tubing Deepwater Commissioning
The installation of flowlines in ever-deeper and -more-remote areas requires specific technologies for precommissioning. Coiled tubing can be a solution, but long durations may affect tubing stress and fatigue.
Optimization of Single-Trip Milling Using Large-Diameter Coiled Tubing
Larger-diameter coiled tubing recently has been used to perform millouts because of its improved set-down force and increased annular velocities for cleanout purposes. Service companies and operators have reduced the number of wiper trips when using larger-diameter CT, to save time and money.
Biocide Treatment Program Reduces Premature Coiled Tubing Failures
A study done to find the root cause of coiled tubing string failures in Montney indicated microbial-induced corrosion, leading the CT service provider to create a biocide treatment program.
Miniaturized Coiled-Tubing System Reduces Costs During Pipeline Decommissioning
This paper presents the challenges and obstacles faced in the use of a new technology for the plugging and deoiling of sections of unpiggable flowlines before decommissioning.
Development of Improved High-Strength Coiled Tubing
Today, there is a need for higher-strength coiled-tubing (CT) grades with better resistance to severe environments and better fatigue performance in both the tube body and the bias weld.
Coiled Tubing Applications
The oil industry has responded rapidly to the decline in oil prices of these last few months.
Microbial-Influenced-Corrosion-Related Coiled-Tubing Failures and Equipment Damage
Microbial-influenced corrosion (MIC) has been implicated in few corrosion-related challenges in the well-service industry in the past.
Coiled-Tubing-Deployed Shutoffs in Alaska With a Polymer Gel and Microfine Cement
A common problem in oil and gas wells is excess free gas or water production from only certain portions of the completed interval.
FeS-Scale Cleanout With High-Pressure Coiled Tubing and Tailored Fluid
The gas-producing carbonate zones of the Ghawar field in eastern Saudi Arabia have been affected by extensive iron sulfide (FeS) scale deposition, reducing overall gas production and increasing risks during well interventions.
Increasing Lubricity of Downhole Fluids for Coiled-Tubing Operations
While increasing coiled-tubing (CT) diameter remains a theoretical option to improve reach, doing so creates logistical challenges.
Enhancing Offshore Coiled-Tubing Interventions in Difficult Weather Conditions
Weather conditions aging offshore facilities presented challenges during a monsoon in the South China Sea.
Are we really in an industry that is so mature that it is devoid of new thoughts and incapable of generating new concepts to meet the challenges that we face?
A New Approach to Coiled-Tubing-Integrity Monitoring
This work will present an object-oriented tracking system that allows CT operators to monitor defects as they evolve over time.
Don't miss out on the latest technology delivered to your email weekly. Sign up for the JPT newsletter. If you are not logged in, you will receive a confirmation email that you will need to click on to confirm you want to receive the newsletter.
18 February 2019
12 February 2019
06 February 2019