TOPICS OF INTEREST
A Comparison Between Seawater-Based and Freshwater-Based Fracturing Fluids
This paper examines the chemistry of developing seawater-based fracturing fluids using two types of polymers as gelling agents and compares results to existing fresh-water-based-fracturing-fluid data under different conditions.
An Innovative Approach to Gel Breakers for Hydraulic Fracturing
Recent studies have found that the viscosities of borate gels at actual downhole pressure conditions may be 80% less than those from standard high-pressure/high-temperature rheometer measurement (which uses 400-psi top pressure).
Ignored Signal During Hydraulic Fracturing Offers Instant Feedback
Always recorded but almost never used, the water hammer signal could offer completions engineers another set of insightful data if petroleum engineers can crack its code.
Drilling and Completion Fluids
With shrinking budgets and limited resources, partnerships and collaboration are considered the best options. It is no secret that universities and industry have a special platform to work hand-in-hand.
Boosting Shale Fracability With Positive Ions
A long-time energy industry executive and chemical engineer has built a new water treatment system that he says can increase recovery rates from shale wells without using chemicals and will recycle all the water used in the process.
Controlling Losses When Recompleting Low-Pressure Reservoirs
A challenge in many permeable, water-sensitive, subhydrostatic reservoirs is avoiding the loss of completion fluid when completing or working over wells.
Acoustic Measurements Aid Mechanical-Damage Characterization in Proppant Packs
The strength and conductivity of proppant packs are key parameters for assessing their performance. This paper introduces a new analysis technique based on interpretation of acoustic measurements to quantify mechanical damage in propping agents.
19 September 2017
19 September 2017
18 September 2017