Design of Gelled Fluid for Debris Removal in Subsea Pipeline
Transportation of hydrocarbon through a pipeline may be hindered as a result of deposition of debris. The presence of debris within the pipeline leads to reduction in the effective flow area, thus reducing the efficiency of the transportation system. Some of the factors leading to formation of the debris are changes in temperature and/or pressure of the transported fluid and chemical reactions, which occur therein.
Pipeline-maintenance pigging is performed routinely to extend the operational life of pipelines. Recently, a combination of mechanical and chemical remedial measures has shown beneficial results in pipeline cleaning. Mechanical-brush pigs loosen the debris adhering to the walls, while chemical techniques, such as the use of gelled fluids, enhance the carrying capacity and help to transport the loosened debris out of the pipeline.
This paper presents the results of tests conducted to design a fast-breaking gelled fluid for a debris-removal operation in a long, large-diameter subsea pipeline in the Asia Pacific region. In addition to exhibiting good stability and debris-carrying capacity under the laboratory test and field conditions, the gel had to be compatible and demonstrate stability when mixed with other additives in the transported hydrocarbon. A highly viscous, aqueous-based linear polysaccharide gel was designed to satisfy these requirements. A key environmental and operational consideration was the easy and fast disposal of the gel after completion of the cleaning operation. With oxidizing breaker, gels prepared in potable water resulted in viscosity of <10 cp within 2 days, which was significantly shorter than when seawater-based gels were treated similarly. Preliminary field results indicate that the combined mechanical and gel system removed a significant amount of debris. Data from future trials will help evaluate the feasibility of such a technique for effective cleaning of the pipeline.
Private Equity Fund To Acquire BHGE’s Reciprocating Compression Division
The reciprocating compression division manufactures and services compression and engine systems that are used in a variety of applications, including the transmission of natural gas across domestic and international pipelines.
Water Outside the Permian: How Are Other Basins Handling the Volumes?
The Permian gets the lion’s share of attention when it comes to produced water, but other basins have a need to haul volumes off-site. How has the market changed in these areas recently? Is there a greater enthusiasm for pipelines, and can water midstream thrive?
New Pipelines Needed to Meet Surge in Permian Crude Demand
Growing supply of Permian crude oil means the basin will need extra takeaway capacity of up to 500,000 B/D by the end of the 2020s, according to new research from Wood Mackenzie.
Don't miss out on the latest technology delivered to your email every two weeks. Sign up for the OGF newsletter. If you are not logged in, you will receive a confirmation email that you will need to click on to confirm you want to receive the newsletter.
16 July 2019
18 July 2019
15 July 2019