Directional/complex wells

Friction-Load Redistribution for Extended-Reach- and Horizontal-Well Completions

In horizontal and extended-reach wells in which long completions are run into highly deviated or lateral zones, large compression loads arise because of running friction.

Abstract image
Getty Images

In horizontal and extended-reach wells in which long completions are run into highly deviated or lateral zones, large compression loads arise because of running friction. These loads remain locked in the string when the packer or cement sets.  Dissipation of friction caused by string vibrations and movements redistributes these friction loads between the wellhead and the packer or the top of the cement. A numerical approach is presented to calculate the redistributed friction load so that an accurate initial tubing load is implemented in the tubular-stress analysis.

Introduction

The long lateral wells in modern shale developments provide new motivation to better understand and model the effect of friction in casing and tubing design. The multiple-barrier approach and modern design techniques compare favorably with previous generations of well construction. Even so, the root-cause failure analysis of individual subsurface components such as tubing, connections, or packers is difficult.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.