Fracturing/pressure pumping

A Comparison Between Seawater-Based and Freshwater-Based Fracturing Fluids

This paper examines the chemistry of developing seawater-based fracturing fluids using two types of polymers as gelling agents and compares results to existing fresh-water-based-fracturing-fluid data under different conditions.

jpt-2017-03-techsyn182799seawaterfracfluid.jpg
Getty Images

Despite the lack of freshwater resources in the Arabian peninsula, fresh water is still used in unconventional-resource operations there. Seawater, however, is plentiful and could substitute for fresh water. The high salinity of seawater raises many chemical challenges in developing design criteria for fracturing fluids. This paper examines the chemistry of developing seawater-based fracturing fluids using two types of polymers as gelling agents and compares results to existing fresh-water-based-fracturing-fluid data under different conditions.

Introduction

The oil and gas industry faces many challenges, including the availability of fresh water for making fracturing fluids, especially in the Arabian peninsula and other arid regions.

Using seawater to make fracturing fluid can help address several obstacles and reduce costs.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.