Hammond Manufacturing’s HJ H series of hinged cover metal enclosures are environmentally sealed to National Electrical Manufacturers Association’s Type 3R, 4, 12, and 13 standards. Designed for wall or bulkhead mounting, the enclosure houses electrical and electronic equipment in installations where dust or water protection is required. Twenty-seven sizes, ranging from 4×4×3 in. to 16×14× 10 in., are available from stock. The unit’s body is fabricated from 16- or 14-gauge steel and the covers from 14-gauge steel. External stainless steel hinge, hinge pin, and two stainless steel clamps pull the cover down on to the seamless poured-in-place gasket. The door is fitted with a bonding stud and the body with a grounding stud.
For more information, visit www.hammondmfg.com