Drilling/completion fluids

Deepwater HP/HT Drilling-Fluid Development and Applications in the South China Sea

Researchers have developed a novel water-based-drilling-fluid system compatible with deepwater HP/HT wells in the Lingshui Block on the basis of a conventional drilling fluid and further optimization. 

jpt-2017-11-182429hero.jpg

Thirty percent of the deepwater wells in the western South China Sea have high-pressure and high-temperature (HP/HT) characteristics. After incorporating analyses of engineering and geological environments for deepwater HP/HT wells in the Lingshui Block, the authors suggest in the complete paper that the solution for drilling problems in deepwater HP/HT wells should start with drilling fluid. Researchers have developed a novel water-based-drilling-fluid system compatible with deepwater HP/HT wells in the Lingshui Block on the basis of a conventional drilling fluid and further optimization. 

Introduction

Most of the reservoirs in the South China Sea are not only deeply buried with a low seabed temperature but also have HP/HT characteristics in the lower part of the well interval. The low temperature of the seawater environment causes an increase of drilling-fluid viscosity in the riser and deteriorates the rheology, leading to a buildup of equivalent circulating density (ECD) that might induce lost circulation.

×
SPE_logo_CMYK_trans_sm.png
Continue Reading with SPE Membership
SPE Members: Please sign in at the top of the page for access to this member-exclusive content. If you are not a member and you find JPT content valuable, we encourage you to become a part of the SPE member community to gain full access.