SPE Workshop: EOR - The Obligatory Way to Optimize Mature Fields 29 - 30 May 2019 Intercontinental Mendoza Mendoza, Argentina


Wednesday, May 29

08:00 - 08:40
Welcome Remarks and Keynote Address
Speaker(s) Jose Luis Massaferro, YPF
08:40 - 10:20
01 Why Continue Waterflooding
Session Chairpersons Jose Condor, Universidad Central del Ecuador; Isabel Vega, Y-TEC

This session intends to cover a revision of different strategies followed to control and monitor the excess of water in  fields under secondary recovery (Waterflood). The session will also include experiences in conformance control applied to injectors, and water blockage through producers aimed to improve oil production.



Injection of Thermally Activated Particles in Depth for Blocking High Permeability Zones: Pilot with Positive Results and New Treatment Cases in Cerro Dragón Field

Alberto Iuliano, Pan American Energy

Lessons Learned in Water Shut off Treatments. Experience in Papagayos formation, Vizcacheras field. Business case

Jose Peltier, YPF; Alvaro Campomenosi, YTEC

New Simplified Methodology to Simulate Gel Water Shut-off Treatment in Producing Wells

Diego Moglia, YPF

Water Flooding Optimization: Data Physics Provides New Insight

Silvio Figliuolo, YTEC


10:20 - 10:50
10:50 - 12:20
02 EOR Screening and its Comprehensive Incremental Value
Session Chairpersons Eric Delamaide, IFP Canada; Lirio Quintero, Baker Hughes a GE company

Screening is the first step in the long road to a successful EOR project. Basic screening can range from the very simple - reviewing lists of screening criteria established by several authors – to the more complex involving dedicated software. Yet, even these methods suffer from weaknesses, such as the fact that parameters are often considered in isolation, and that true geological complexity cannot be considered. This session will focus on identifying the issues for screening and the potential ways they could be improved. 



Importance of Dynamic Reservoir Properties in Screening of EOR Technologies for Mature Reservoirs

Sergio Cilento, CMG

Grimbeek Successful Polymer Pilot Books 1P, 2P, 3P Reserves in Gulf San Jorge Basin – Manantiales Behr: Four Estimation Methods  

 J.E. Juri, A.M. Ruiz , V. Serrano , F. Schein, M. Thill, P. Guillen, A. Tosi, M. Pacchy, L. Soto, A. Therisod, M. Paura, P. Lauro, F. Funes, P. Alonso  

EOR Screening Methods Assisted by Digital Rock Analysis

Claudia Lorena Delgadillo Aya, Colombian Petroleum Institute - Ecopetrol

12:20 - 13:50
13:50 - 15:30
03 Water Sourcing and Chemical Flood Design
Session Chairpersons Eleonora Erdmann, Universidad Nacional de Salta; Gonzalo Gallo, ITBA; Gianna Pietrangeli, Flotek

Water quality for waterflooding and EOR is a major industry issue accounting for significant technical, economic, environmental and health impacts. The sourcing and/or treatment of the utilized water can determine the success of projects around the globe. In this session, we will be discussing the requirements, economics, technical, and scientific aspects of water utilization to guarantee the realization of industry projects.



Optimization of EOR Formulation Using the Well known Simple HLD Expression and the Recently Understood Tricks of Surfactant Nonlinear Ternary Mixtures

Ana Forgiarini, Universidad de Los Andes

Waterflood Enhancement through Successful Implementation of Microemulsion Additives in North American Field Pilots

Jose Camilo Jimenez, Flotek

A Novel, Field-prove Reservoir Triggered Polymer for Enhancing the Economics of Mobility Control Floods

Mahdi Kazempour, NALCO

Polymer Selection and Gel Formulation Assessment for a High Temperature Oilfield in Argentina

Jorge Monzon, SNF


15:30 - 16:00
16:00 - 17:30
04 Business Case: the Need to do a Full Field Commercial Evaluation
Session Chairpersons Carlos Glandt, Consultant; Celso Branco, Petrobras; Eugenio Ferrigno, YPF

This session will address the need to have a de-risked robust business case to embark in an EOR Pilot/Large scale project.  This implies building a spectrum of production forecasts covering all project key uncertainties leading to a sound economic analysis. Typical EOR projects are mounted on mature waterfloods with abundant geological and production data that provide a fairly well calibrated simulation model. Simulation results will be impacted by geological heterogeneities, grid dimension, relative permeability curves, fluid viscosities, and many others. Early simulated sensitivities to these variables are key to focus data acquisition and validation at both, laboratory and field level. The session will cover simulation studies, risk analysis, economic impact posed by wells and facilities conditions, as well as the need for tax and fiscal incentives. A well-grounded commercial business case that ranks against other production alternatives should be the starting point to embark in the multimillion-dollar investment required for field pilots. A successful production pilot will unlock the promise of EOR incremental reserves.



Grimbeek Successful Polymer Pilot Extends to 80 Injectors at CGSJ Basin targeting an 18% STOOIP incremental oil

 J.E. Juri, A.M. Ruiz , V. Serrano , F. Schein, M. Thill, P. Guillen, A. Tosi, M. Pacchy, L. Soto, A. Therisod, M. Paura, P. Lauro, F. Funes, P. Alonso  

High-Resolution Dynamic Modeling Supports EOR Business Evaluation in Los Perales Field, Argentina

Diego Perez, YPF

Derisking Strategy for High Temperature, High Salinity and High Hardness SP Flooding in Barrancas Formation: Laboratory Experiments, Single Well Tracer Tests Campaign, and Pilot Design

Roberto Ariel Lucero, YPF

17:30 - 19:00

Thursday, May 30

08:00 - 09:30
05 Lower Cost Wells and Modular Facilities
Session Chairpersons Francisco Francilmar Fernandes, Petrorio; Andres Lopez Gibson, YPF

In order to be selected for execution, EOR projects need to achieve better KPIs than their alternatives. Knowing that time and money are two important leverages to improve project performance, this session will focus on new technologies and methodologies involving well design & equipment, modularity and efficiency advances in facilities & operations that lower development and lifting costs along the projects, as well as on ways to improve EOR timing, bring it up front in a fields development and/or reducing its development time.



Lower Cost Well - Essential for Improved Oil Recovery – Polvo Case

Valdo Rodrigues, PetroRio

Challenges of Optimizing Mature Field Production Facilities

Wally Georgie, Maxoil Process Consultancy

Modularity Options and Cost Optimization on an EOR Project

Enrique Leisen, YPF

09:30 - 10:00
10:00 - 11:40
06 Current and Emerging EOR Technologies, and Challenges with Existing Technologies
Session Chairpersons Cesar Patiño, Ecopetrol; Pallav Sarma, Tachyus

This session will cover the emerging technologies that can help improve operational efficiency and economics of EOR projects, including applications of EOR to unconventionals, new materials, methodologies and processes for EOR, and applications of surveillance, modeling, simulation and optimization. It will look at advances in surveillance techniques and IoT for better and smarter acquisition of data, and how this data can be used to the fullest extent via data science and machine learning methods and their applications to EOR projects, advances in modeling and simulations of EOR physics, and approaches that combine these seemingly disparate fields. It also aims to present insights on applications of existing modeling approaches for EOR and lessons learnt. Finally, it aims to explore new materials and processes for EOR, and emerging EOR technologies for shale, such as huff-and-puff, with emphasis on modeling, implementation and case studies.  



Active Flood Management of Multizone Wells using an Autonomously Remote Controlled Valve Array

Warren MacPhail, NCS Multistage

Successful Industrial Scale Makedown and Field Injection of EOR Scleroglucan Polymer

Briana Kozlowicz, Cargill Bioindustrial Group

Creating Chemistry for Advanced Chemical EOR Solution Offering – Opportunities & Challenges

Karin Eberius, BASF SE

11:40 - 13:00
13:00 - 14:30
07 Pilot Design
Session Chairpersons Jose Luis Massaferro, YPF; Carlos Glandt, Consultant; Gaston Fondevila, Grupo CAPSA

The proper pilot design is at the center of a well-executed commercial development plan. The discussion is driven by the clear understanding of the objectives of the pilot, i.e., the key risk factors the pilot would help us quantify.  The expansion into a commercial venture requires in all cases satisfactory results of a production “oil-in-the-tank” pilot in a confined setting. This is a multipattern arrangement costly in time and company resources.This session will address a) the piloting steps needed before we design and commence the final production pilot and b) the design options of “low cost” oil-in-the-tank pilots to provide unambiguous results required for a commercial expansion decision. Field cases will be most valuable. Illustration of salient topics of this session are: a - Injectivity of the EOR fluids under matrix and fracture conditions, b- Communication and fly times between injectors and surrounding producers, c - Mechanisms for oil bank propagation and chemical consumption by adsorption and other losses, d- Polymer viscosity degradation, e – Design and execution of an Oil-in-the-tank pilot in a fully confined arrangement. 



Combining Field Measurements and Dynamic Modeling for Pilot Design: Los Perales Case Study

D. Perez, M. Cocco, D. Volzone, E. Fuzul, R. Katz, G. Pedersen, J.P. Ursule, J. Massaferro, YPF

Characterization of the Rayoso Formation: the Importance of 3D Modeling in Decision-making for a Polymer Injection Project

I.Weisman, A. Arguello, R. Lehu, G. Tennerini, S. Gandi, YPF

Polymer Flooding Pilot Design: How to Prolong Life and Increase Asset Value in a Marginal Area in the San Jorge ́s Gulf Basin

M.E. Peyrebonne Bispe, M. Villambrosa, M. Goldman, Dario Benitez, CAPEX; F. Ponce, Petrominera del Chubut SE)

14:30 - 15:00
15:00 - 16:30
08 Field Experiences
Session Chairpersons Rodrigo Dalle Fiore, Ecopetrol; Andres Lopez Gibson, YPF

After screening for candidate fields, studying the reservoirs to select a suitable one for EOR, performing extended lab testing on their fluids and cores, and after obtaining corporate approval, field pilots and their subsequent expansions are the firsthand experiences. Unexpected situations will occur and must be documented if we want EOR to become a reality.

This session will show how EOR is done at the field. It will present common problems and lessons learned, aiming to obtain monitoring best-practices and de-risking strategies to guarantee future development.  



Implementation and Assessment of Production Optimization in a Steamflood Using Machine-Learning Assisted Modeling

Carlos Calad, Tachyus

Lessons from the Planning, Design, Execution and Results of Two ASP Pilots in Colombia: San Francisco and Caracara Sur

Danuil Dueñas, Ecopetrol

Chemical EOR - Field Experience and Research

Farouq Ali, University of Houston