This workshop has been postponed until further notice due to the challenges in the industry caused by the current restrictions on travel and public health concerns.

We are working closely with our stakeholders and will further notify on updates through emails and this website. SPE holds numerous events around the world and we continually monitor conditions that might affect participants.

 

This workshop will include presentations, case studies, posters, and discussions about well integrity challenges and the technological advancements in material and process to construct, operate, monitor and abandon wells to have "leak-free" wells.

Well integrity problems are commonly faced worldwide. 45% in the Gulf of Mexico, 34% in the North Sea UK, and 18% of the wells in North Sea Norway respectively are suffering from all sorts of well integrity failures.

In the Middle East, more than half of all wells have integrity issues with 10–15% of these being critical. The increase in extended reach as well as HP/HT wells, shale formations, corrosion, scale, and sour service fields in the Middle East, are increasing the risks of well integrity failure. 

 

 

 


The workshop will address the following aspects of well integrity:

  • To assure containment and integrity in new wells, whether these are hydrocarbon production, water injection, gas storage, water and gas. Starting with a robust well design and throughout the well's lifecycle until permanent plug and abandonment.
  • Address well planning practice, completion design, drilling practice, production practice, intervention practice
  • Remedy for existing well Integrity challenges, due to defects within containment of the well envelop, indicating that the seal or zonal isolation is not fully effective. 

“Well integrity is a multi-disciplinary approach that needs not only technologies and skills but also organisational alignments. When I decided to organise this workshop, I decided to have a full representation of these disciplines including regulators, industry experts and passionate people so we can collectively make the difference. I am looking forward to YOUR attendance and contribution!”

Salim Taoutaou, Workshop Co-Chair