Integrated Core Analysis, Modelling and Reservoir Characterisation: Module 1 - Conventional Core Analysis and Reservoir Zonation
Each module has a duration of two days with emphasis on different aspects of reservoir characterisation, the ultimate goal being the preparation of optimal formation and rock property data from core analysis and other data sources for the purpose of static geological modelling and dynamic reservoir simulation. Seminar style lectures are typically given each morning and participants put their learning into practice in the afternoons, utilising real field data (including their own if desired). For this purpose, specialised spreadsheets are utilised.
"Intelligent" spreadsheets will be made available to course participants for their use in practical exercises – putting theory into practice. Course participants may also bring their own data, which they may use with the spreadsheets. Spreadsheets may be operated in rapid fashion to obtain optimal solutions. Sample of spreadsheets are:
Part 1 of the overall course covers all aspects related to using Routine Core Analysis (RCA) laboratory results to optimally zone a cored reservoir interval. Commencing with core management, topics discussed are plug selection and cleaning, followed by laboratory measurement techniques. The importance of integration with other information is demonstrated: core photographs and detailed core description, GR logs and core gamma, petrographics etc., stressing the correct use of laboratory data. It is also shown how to apply necessary corrections to lab measurements before zonation. The end objective is optimal reservoir zonation for petrophysical application and dynamic reservoir simulation. Here are the main topics which will be covered in this course module:
Conventional Core Analysis and Reservoir Zonation
Upon completion of this course, participants should:
- Appreciate the multidisciplinary nature of reservoir characterization using core data
- Understand various laboratory methods used in conventional core analysis
- Synthesise conventional core analysis data for various uses
- Optimally zonate reservoir intervals and integrate with other subsurface data
The course is intended for geologists, petrophysicists, reservoir engineers and technical personnel involved in reservoir characterization and field development studies.
Engineers are responsible for enhancing their professional competence throughout their careers. Licensed, chartered, and/or certified engineers are sometimes required by government entities to provide proof of continued professional development and training. Training credits are defined as Continuing Education Units (CEUs) or Professional Development Hours (PDH).
Attendees of SPE training courses earn 0.8 CEUs for each day of training. We provide each attendee a certificate upon completion of the training course.
This course is available for in house training at your office location.
|Middle East and North Africa||+971.4.457.5875|
All cancellations must be received no later than 14 days prior to the course start date. Cancellations made after the 14-day window will not be refunded. Refunds will not be given due to no show situations.
Training sessions attached to SPE conferences and workshops follow the cancellation policies stated on the event information page. Please check that page for specific cancellation information.
SPE reserves the right to cancel or re-schedule courses at will. Notification of changes will be made as quickly as possible; please keep this in mind when arranging travel, as SPE is not responsible for any fees charged for cancelling or changing travel arrangements.
We reserve the right to substitute course instructors as necessary.
Prof Peter Behrenbruch is a consultant and an Adjunct Professor at the Australian School of Petroleum at the University of Adelaide (UoA), specialising in reservoir engineering, field development planning and petroleum management. He also teaches at the Ho Chi Minh University of Technology and recently taught at the University of Western Australia and Curtin University. He has worked for over 40 years in the petroleum industry, most recently as Chief Operating Officer and Project Director for AED Oil and East Puffin (2007-09) for the Puffin offshore development, Timor Sea.
Prior to his academic career (2001-2006), commencing in 2001 as head of the new School of Petroleum Engineering and Management at the UA, he worked for 16 years for BHP Billiton, most recently as Chief Reservoir Engineer for their worldwide petroleum operations. Other positions with BHP Billiton involved mainly technical and project management, and general management positions. He was the project manager (feasibility) for two FPSO projects, the Skua and Griffin area fields, offshore Australia. He was also the Technical Manager for the Dai Hung project, offshore Vietnam where first oil was achieved in just 18 months from sanction. Before that time, he worked for Shell International (8 years) in the Netherlands, including two years as Senior Lecturer Reservoir Engineering at Shell’s training centre and in Australia, seconded to Woodside Energy, involved in Australia’s largest capital project (at the time), the Northwest Shelf Gas development. He started his career in Calgary, Canada, first with Hudson’s Bay Oil and Gas and then with the US consulting company Scientific Software Corporation.
Peter holds a BSc degree in Physics from the University of British Columbia and a MS degree in Nuclear Engineering from Stanford University. He has been an active member of the Society of Petroleum Engineers, including Director for the Asia-Pacific region (1996-98) and as a member of the Board. He was an SPE Distinguished Lecturer during 2001-02 and a PESA Distinguished Lecturer during 2002. He has lectured at many institutions and was a visiting professor at Stanford University in 2000. He has published over 40 papers, technical and managerial topics. His professional interests are in optimal planning and project management of offshore petroleum discoveries. His primary research interests are in the area of special core analysis and the development of predictive models for reservoir characterisation.