Method for Monitoring Mud Contamination in Wireline-Formation-Tester Sampling

Getty Images

The wireline formation tester (WFT) is a well-developed technology used to collect representative downhole fluid samples. Collecting low-contamination downhole samples in wells drilled with miscible oil-based mud (OBM) is challenging because the process must balance the need to acquire a sample with the desired level of contamination while using the minimum rig time.

The authors introduce a simple but effective method for monitoring WFT sampling when targeting the low levels of contamination needed for asphaltene-onset-pressure analysis.

Introduction

Flow-assurance problems caused by asphaltene deposition are common reasons for lost and deferred production in Gulf of Mexico Miocene reservoirs. High-quality samples are needed to measure the ­asphaltene-onset pressure and manage related flow-assurance problems. The ­asphaltene-onset pressure varies with the level of OBM contamination. The rise of asphaltene-related flow-assurance issues encourages operators to acquire high-quality downhole samples with the lowest possible OBM contamination.

To reduce OBM contamination, operators have to pump out fluid from the formation to the borehole before filling the samples at the desired OBM-­contamination level. There is not a standard procedure to determine a sample’s contamination level during the pump-out. Engineers sometimes rely on empirical evidence and previous experience to determine contamination levels. This study introduces a practical method to estimate the contamination level from real-time fluid-analyzer data. A discussion of methods used to predict contamination is provided in the complete paper.

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 175116, “Effective Method for Monitoring Oil-Based-Mud Contamination in Wireline-Formation-Tester Sampling,” by W. Pineda, BP; F. Gozalpour, formerly BP; and Mehdi Hagshenas, BP, prepared for the 2015 SPE Annual Technical Conference and Exhibition, Houston, 28–30 September. The paper has not been peer reviewed.
...
This article is reserved for SPE members and JPT subscribers.
If you would like to continue reading,
please Sign In, JOIN SPE or Subscribe to JPT

Method for Monitoring Mud Contamination in Wireline-Formation-Tester Sampling

26 October 2016

Volume: 68 | Issue: 11

STAY CONNECTED

Don't miss the latest content delivered to your email box weekly. Sign up for the JPT newsletter.