Pneumatic Pipe Cutter

The Model 5 8002 7000 pipe cutter from CS Unitec cuts and bevels pipes of diameters ranging from 12 in. to 63 in. and wall thicknesses ranging from 0.25 in to 2 in. It is a two-speed pneumatic machine that operates at 1,800 rev/min for cutting and 350 rev/min for low-speed/high-torque beveling. The machine cuts ductile iron, nonferrous metal, polyvinyl chloride, plastic, and cement pipes. It bevels 40°, 60°, and 90° angles with optional blades for on-site weld preparation. The machine operates on an air volume of 77 ft3/min at 90 psi air pressure. It is ATEX-certified under Class II 2 GcT6 and can be used in industrial zones where flammable gas, vapor, mist, and dust may be present and where surface temperatures do not exceed 185°F.

For more information, visit www.csunitec.com